Table of Contents
Advertisement
Information in this Display
is a sequence number used to identify the connection.
Seq
is the logical interface:
I
is the direction of the connection related to the port:
D
= Incoming,
I
is described following
State
is the Node number.
N
is the RLP number, except for a file transfer, or connection, in which case
LP
this number is always
is the port number, unless
P
Port Signals Display
This display lists basic configuration and line status for all ports on a specified LP,
as well as signal states (on/off) at the physical interfaces.
Press
at the Status Display menu and, when prompted, enter the number of an
[D]
LP. The display will show the first four ports on the LP, and pressing
display the other four ports.
Local Node Displays
= PVC,
= SVC
P
S
= Outgoing.
O
Figure
3-4.
.
253
is
, in which case the port number is
LP
253
.
2
will
[PgDn]
3- 7
Advertisement
Table of Contents
Need help?
Do you have a question about the Netlink FRX8000 and is the answer not in the manual?