Table of Contents
Advertisement
Configuration Information
Required by User
Line Coding
Frame Type
Clock Source
1.8.2
Connecting the CSMIM-T1 to a Fractional T-1 Line
In a fractional T-1 setup, only a portion of the 24 timeslots or DS-0's are
used. Some may be routed through the Drop and Insert Port to a PBX, as
in a voice application. Table 1-2 provides a short list of information
necessary to use a fractional T-1 circuit in a PPP environment.
Configurations may vary depending on the hub. The line configuration
information shown in Table 1-2 must be supplied by the service provider.
Configuration Information
Required by User
Line Coding
Frame Type
Clock Source
DS-0's (Timeslots)
For more instructions on the T-1 setup, please refer to the
Administrator's Guide
CSMIM-T1 Hardware Installation Guide
Table 1-1 Telco Configuration Information
Table 1-2 Telco Configuration Information
for the CSMIM-T1.
Telco Connection Information
Configuration Information
Supplied by
Service Provider
B8ZS or AMI
ESF or D4
Loop Timing or Local Timing
Configuration Information
Supplied by
Service Provider
B8ZS or AMI
ESF or D4
Loop Timing or Local Timing
Timeslots being used for each
end of the circuit
Annex Network
1-11
Advertisement
Table of Contents
