Cabletron Systems CSMIM-T1 Installation Manual page 68

Enterasys csmim-t1 communication server: install guide
Hide thumbs Also See for CSMIM-T1:
Table of Contents

Advertisement

Chapter 3: ROM Monitor Commands
Statistic
Bad Types/
Lengths
Frames Sent
Carrier Sense
Losses
Clear to Send
Losses
Collisions Detected
Excessive Collision
Losses
3-26
Table 3-3 .Network Statistics (Continued)
Description
The number of unknown packet types if Ethernet IP
encapsulation is being used. The number of packets
with illegal lengths if IEEE 802.2/802.3 IP
encapsulation is being used.
The number of frames sent.
The number of times packets could not be transmitted
because the CSMIM-T1 lost the Carrier Sense signal –
usually the result of excessive traffic on the Ethernet.
The number of times packets could not be transmitted
because the CSMIM-T1 lost the Clear to Send signal –
usually the result of excessive traffic.
The number of times the CSMIM-T1 had to retry
transmissions automatically – usually the result of
normal Ethernet traffic. These retries do not cause the
boot command to display ''*."
The number of times the CSMIM-T1 could not transmit
packets because there were too many collisions –
usually the result of excessive traffic on the Ethernet.
The boot command displays these retries as "*."
CSMIM-T1 Hardware Installation Guide

Advertisement

Table of Contents
loading

Table of Contents