Cabletron Systems CSMIM-T1 Installation Manual page 183

:T26= n Bit Mapped Register (Table 7-17)
Bit
Function
Position
0
1
:T42= n V.34/V.FC Connection Speed Selection
0
Default V.34/V.FC connection speed selection.
1 Highest V.34/V.FC connection speed selection (about 2 speeds
above default).
2 Higher V.34/V.FC connection speed selection (about 1 speed
above default).
3 Default V.34/V.FC connection speed.
4 Lower V.34/V.FC connection speed (about 1 speed below
default).
5 Lowest V.34/V.FC connection speed (about 2 speeds below
default.
Allows you to change the V.34/V.FC connection speed
according to line quality. We recommend leaving this register
at its default setting.
If you notice that your modem falling back during V.34/V.FC
connections, or that you are seldom able to make 28,800
connections, you can try the lower settings of this register.
CSMIM-T1 Hardware Installation Guide
Table 7-17 :T26 Settings
0 Enables 2-second billing delay.
1 Disables 2-second billing delay. This bit decreases connec-
tion time, but may affect attaining connections.
0 Normal answer tone length in V.32 mode.
1 Shortens answer tone length in V.32 mode.
Registers
7-57