Table of Contents
Advertisement
Memory Locations and Replacement Procedures
2.
Insert the DRAM SIMM straight down between the connector contacts enough for the
tabs on the connector arms to align with the two DRAM SIMM alignment notches.
3.
Push the DRAM SIMM down into the connector contacts. Then rotate the two
connector arms toward the DRAM SIMM to lock it into place.
Figure B-8
➀
Connector arms
➁
DRAM SIMM
B-8
Mode Switch Bank Settings and Optional Installations
Installing the DRAM SIMM on 7G4202-60 or 7G4282-41
Ã
À
Á
Ã
Â
➂
Connector contacts
➃
Alignment notches (2)
À
Advertisement
Table of Contents
Troubleshooting
