Chapter 3: Installation; Important Notice - Enterasys Matrix 7G4282-41 Hardware Installation Manual

Electrical Hazard: Only qualified personnel should install the DFE-Platinum modules.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
Read the Release Notes shipped with the DFE-Platinum module to check for any exceptions to the
supported features and operation documented in this guide.
This chapter provides the instructions to install the 7G4202‐60 and 7G4282‐41
DFE‐Platinum modules.
Note: Unless otherwise noted, the installation instructions apply to all DFE-Platinum
modules.
Follow the order of the sections listed below to correctly install the modules.
• "Unpacking the DFE‐Platinum Module" on page 3‐2
• "Installing Optional Network Expansion Module (NEM)" on page 3‐2
• "Backplane Connections and Installation Rules" on page 3‐3
• "Installing Module into Matrix E7 or Matrix
• "Installing Module into Matrix N3, N5, or N1 Chassis" on page 3‐9
• "Connecting to the Network" on page 3‐11
• "Connecting to COM Port for Local Management" on page 3‐15
• "Completing the Installation" on page 3‐21

Important Notice

N7 Chassis" on page 3‐6
Enterasys Matrix DFE-Platinum Series Hardware Installation Guide
3
Installation
3-1