Installing The Dram Simm; Installing The Dram - Enterasys 2200 Installation & User Manual

SIMM Upgrade
B.4.2

Installing the DRAM SIMM

CAUTION: Observe all antistatic precautions when handling sensitive electronic
equipment.
To install a DRAM SIMM, refer to
1. With the SIMM alignment notch oriented as shown in
between the connector teeth.
2. Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM
and the connector clips lock the SIMM into place.
Figure B-4 Installing the DRAM
B-8 Optional Installations and Mode Switch Bank Settings
Figure B-4 and proceed as follows:
Figure B-4, insert the SIMM down