Appendix A: Specifications; Dfe-Platinum Module Specifications; A-1 Specifications - Enterasys Matrix 7G4282-41 Hardware Installation Manual

This appendix provides information about the following:
• "DFE‐Platinum Module Specifications" on page A‐1
• "COM Port Pinout Assignments" on page A‐2
• "Regulatory Compliance" on page A‐3
Enterasys Networks reserves the right to change the specifications at any time without
notice.

DFE-PLATINUM MODULE SPECIFICATIONS

Table
module specifications for the 7G4202‐60 and 7G4282‐41. Unless noted differently, the
specifications apply to both DFE modules.
Table A-1 Specifications
Item
7G4202-60 Ports
Ports 1 through 60
7G4282-41 Ports
Ports 1 through 40
Option Slot
Processors/Memory
Processor
Dynamic Random Access
Memory (DRAM)
FLASH Memory
A‐1 provides the I/O ports, processors and memory, physical, and environmental
Specification
Sixty 10BASE-T/100BASE-TX/1000BASE-T compliant ports,
via sixty RJ45 connectors.
Forty 10BASE-T/100BASE-TX/1000BASE-T compliant ports,
via forty RJ45 connectors.
Supports one optional NEM.
MPC750CX, 400 MHz processor
128 MB
32 MB
Enterasys Matrix DFE-Platinum Series Hardware Installation Guide
A
Specifications
A-1