Connecting To A Modem; Connecting A Vt Series Terminal - Enterasys Matrix 7G4282-41 Hardware Installation Manual

Connecting to COM Port for Local Management
Figure 3-11
➀
UTP straight-through cable with RJ45 connectors
➁
RJ45 COM port

Connecting to a Modem

To connect a modem to an Enterasys Networks DFE‐Platinum module COM port
(Figure
male adapter, and proceed as follows:
1. Connect the RJ45 connector at one end of the UTP straight‐through cable
COM port
2. Plug the RJ45 connector at the other end of the UTP straight‐through cable
RJ45‐to‐DB25 modem adapter
3. Connect the RJ45‐to‐DB25 adapter
4. Turn on the modem
3-18 Installation

Connecting a VT Series Terminal

Ã
3‐12), use a UTP straight‐through cable with RJ45 connectors and an RJ45‐to‐DB25
➁
of the DFE‐Platinum module.
➃
.
 ➂
.
➂
to the communications port on the modem
➂
RJ45-to-DB25 VT adapter
➃
VT series terminal
➀
Á
to the
➀
into the
➃
.