Configuring Ospf Over Non-Broadcast Multiple Access; Monitoring Ospf - Cabletron Systems IA1100 User's Reference Manual

Configuring OSPF over Non-Broadcast Multiple Access

You can configure OSPF over NBMA circuits to limit the number of Link State
Advertisements (LSAs). LSAs are limited to initial advertisements and any subsequent
changes. Periodic LSAs over NBMA circuits are suppressed.
To configure OSPF over WAN circuits, enter the following command in Configure mode:
Configure OSPF over a WAN
circuit.

Monitoring OSPF

The IA lets you display OSPF statistics and configurations contained in the routing table.
Information displayed provides routing and performance information.
To display OSPF information, enter the following commands in Enable mode:
Show IP routing table.
Monitor OSPF error conditions.
Show information on all interfaces
configured for OSPF.
Display link state advertisement
information.
Display the link state database.
Shows information about all OSPF
routing neighbors.
Show information on valid next hops.
Display OSPF routing table.
Monitor OSPF statistics for a specified
destination.
Shows information about all OSPF
routing version
Shows OSPF Autonomous System
External Link State Database.
Show all OSPF tables.
Internet Appliance User Reference Manual
Chapter 7: OSPF Configuration Guide
ospf add nbma-neighbor
<name-or-IPaddr>
to-interface
ip show table routing
ospf monitor errors destination
<hostname-or-IPaddr>
ospf monitor interfaces destination
<hostname-or-IPaddr>
ospf monitor lsa destination
<hostname-or-IPaddr>
ospf monitor lsdb destination
<hostname-or-IPaddr>
ospf monitor neighborsdestination
<hostname-or-IPaddr>
ospf monitor next-hop-list
destination
ospf monitor routes destination
<hostname-or-IPaddr>
ospf monitor statistics destination
<hostname-or-IPaddr>
ospf monitor version
ospf sbow AS-External-LSDB
ospf show all
<hostname-or-IPaddr>
[eligible]
<hostname-or-IPaddr>
89