Exporting All Static Routes Reachable Over A Given Interface To A Specific Rip-Interface - Cabletron Systems IA1100 User's Reference Manual

4. Create a Direct export source since we would like to export direct/interface routes.
ip-router policy create direct-export-source directExpSrc
5. Create the Export-Policy redistributing the statically created default route, and all
(RIP, Direct) routes into RIP.
ip-router policy export destination ripExpDst141 source statExpSrc
ip-router policy export destination ripExpDst141 source ripExpSrc
ip-router policy export destination ripExpDst141 source directExpSrc
Exporting All Static Routes Reachable Over a Given Interface to a Specific RIP-
Interface
In this case, router R1 would export/redistribute all static routes accessible through its
interface 130.1.1.1 to its RIP-interface 140.1.1.1 only.
1. Create a RIP export destination for interface with address 140.1.1.1, since we intend to
change the rip export policy for interface 140.1.1.1
ip-router policy create rip-export-destination ripExpDst141
interface 140.1.1.1
2. Create a Static export source since we would like to export static routes.
ip-router policy create static-export-source statExpSrc130 interface
130.1.1.1
3. Create a RIP export source since we would like to export RIP routes.
ip-router policy create rip-export-source ripExpSrc
4. Create a Direct export source.
ip-router policy create direct-export-source directExpSrc
Internet Appliance User Reference Manual
network default
network all
network all
Chapter 9: Routing Policy Configuration Guide
163