Ospf Configuration Examples - Cabletron Systems IA1100 User's Reference Manual

Chapter 7: OSPF Configuration Guide
Show all OSPF areas.
Show OSPF errors.
Show information about OSPF export
policies.
Shows routes redistributed into OSPF.
Show all OSPF global parameters.
Show information about OSPF import
policies.
Show OSPF interfaces.
Shows information about all valid next
hops mostly derived from the SPF
calculation.
Show OSPF statistics.
Shows information about OSPF Border
Routes.
Show OSPF timers.
Show OSPF virtual-links.

OSPF Configuration Examples

For all examples in this section, refer to the configuration shown in
The following configuration commands for router R1:
• Determine the IP address for each interface
• Specify the static routes configured on the router
90
ospf show areas
ospf show errors
ospf show export-policies
ospf show exported-routes
ospf show globals
ospf show import-policies
ospf show interfaces
ospf show next-hop-list
ospf show statistics
ospf show summary-asb
ospf show timers
ospf show virtual-links
Internet Appliance User Reference Manual
Figure 7 on page 95.