Defining The Maximum Age; Configuring A Port- Or Protocol-Based Vlan; Creating A Port- Or Protocol-Based Vlan; Adding Ports To A Vlan - Cabletron Systems IA1100 User's Reference Manual

Defining the Maximum Age

If a bridge does not hear BPDUs from the root bridge within a specified interval, it
assumes that the network has changed and recomputes the spanning-tree topology.
To change the default interval setting, enter the following command in Configure mode:
Change the amount of time a bridge will
wait to hear BPDUs from the root bridge
for default spanning tree.
Change the amount of time a bridge will
wait to hear BPDUs from the root bridge
for a particular instance of spanning tree.

Configuring a Port- or Protocol-Based VLAN

To create a port- or protocol-based VLAN, perform the following steps in the Configure
mode:
1. Create a port or protocol based VLAN.
2. Add physical ports to a VLAN.

Creating a Port- or Protocol-Based VLAN

To create a VLAN, enter the following command in Configure mode:
Create a VLAN.

Adding Ports to a VLAN

To add ports to a VLAN, enter the following command in Configure mode.
Add ports to a VLAN.
Internet Appliance User Reference Manual
Chapter 2: Bridging Configuration Guide
stp set bridging max-age
pvst set bridging spanning-tree
<string>
max-age
<vlan-name> <type>
vlan create
<port-list>
vlan add ports
<num>
<num>
<num>
id
<vlan-name>
to
45