Chapter 12: Web Hosting Configuration Guide
Specifying the VPN Port Number
You can specify the port number to be used for secure key transfer in Virtual Private
Networks (VPN). The default port number for this usage is 500.
To specify a VPN port number, enter the following command in Configure mode:
Specify the port number for
secure key transfer in VPNs.
Displaying Load Balancing Information
To display load balancing information, enter the following commands in Enable mode:
Show the groups of load
balancing servers.
Show source-destination
bindings.
Show load balancing statistics.
Show load balance hash table
statistics.
Show load balance options for
verifying the application.
202
load-balance set vpn-dest-port
<port number>
load-balance show virtual-hosts [group-
<group name>
name
<ipaddr>
][virtual-port
load-balance show source-mappings
<ipaddr range>
[client-ip
<ipaddr>
][virtual-port
number>
][destination-host-ip
load-balance show statistics [group-name
<group name>
][virtual-ip
<ipaddr>
][virtual-port
load-balance show hash-stats
load-balance show acv-options [group-name
<group name>
][destination-host-ip
<virtual ipaddr>
][destination-host-port
<virtual port number>
Internet Appliance User Reference Manual
][virtual-ip
<port number>
]
][virtual-ip
<port
<ipaddr>
<port number>
]
]
]