Example Configurations
The following illustration shows a network design based on SmartTRUNKs. R1 is an IA
operating as a router, while S1 and S2 are IAs operating as switches.
Cisco
7500
10.1.1.1/24
Router
The following is the configuration for the Cisco 7500 router:
interface port-channel 1
ip address 10.1.1.1 255.255.255.0
ip route-cache distributed
interface fasteth 0/0
no ip address
channel-group 1
The following is the configuration for the Cisco Catalyst 5K switch:
set port channel 3/1-2 on
Internet Appliance User Reference Manual
st.1
Router
R1
11.1.1.2/24
10.1.1.2/24
to-s1
to-cisco
12.1.1.2/24
to-s2
st.3
Switch
S2
st.5
Cisco
®
Catalyst
5K Switch
Chapter 3: SmartTRUNK Configuration Guide
st.2
Switch
S1
st.4
Server
53