Access Control Screen - Cabletron Systems SmartSwitch 9000 Appendix

9X4XX Series Local Management

Access Control Screen

The Access Control Screen, Figure 1, allows a user to assign up to 16 IP addresses,
in order to limit remote management access of the SmartSwitch 9000 modules.
This feature can be enabled or disabled, and it does not operate when a user
accesses it locally through the Environmental Module EPIM port or through a
module front panel port.
To access the Access Control Screen, go to the Module Configuration Menu
Screen, Then, select the SNMP Configuration option. Finally, select the Access
Control List option.
Module Name: 9F426-02
Slot Number: 10
Access Control Lists: [DISABLED]
2
SmartSwitch 9000 Local Management
Access Control
IP Addresses
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE
Figure 1. Access Control Screen
Firmware Revision: 01.12.00
BOOTPROM Revision: 01.01.01
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
EXIT RETURN