Lite Rmon Groups; Standard Rmon Groups; Professional Rmon Groups - Cabletron Systems IA1100 User's Reference Manual

Chapter 17: RMON Configuration Guide

Lite RMON Groups

This section describes the RMON groups that are enabled when you specify the Lite
support level. The Lite RMON groups are shown in
Table 4. Lite RMON Groups
Group
EtherStats
Event
Alarm
History

Standard RMON Groups

This section describes the RMON groups that are enabled when you specify the Standard
support level. The Standard RMON groups are shown in
Table 5. Standard RMON Groups
Group
Host
Host Top N
Matrix
Filter
Packet Capture

Professional RMON Groups

The Professional RMON groups correspond to the RMON 2 groups defined in RFC 2021.
While RMON 1 groups allow for the monitoring of packets at the MAC layer, RMON 2
groups focus on monitoring traffic at the network and application layers.
250
Function
Records Ethernet statistics (for example, packets dropped,
packets sent, etc.) for specified ports.
Controls event generation and the resulting action (writing a
log entry or sending an SNMP trap to the network
management station).
Generates an event when specified alarm conditions are met.
Records statistical samples for specified ports.
Function
Records statistics about the hosts discovered on the network.
Gathers the top n hosts, based on a specified rate-based
statistic. This group requires the hosts group.
Records statistics for source and destination address pairs.
Specifies the type of packets to be matched and how and
where the filtered packets should flow (the channel).
Specifies the capture of filtered packets for a particular
channel.
Internet Appliance User Reference Manual
Table 4.
Table 5.