Exporting A Given Static Route To All Rip Interfaces; Exporting All Static Routes To All Rip Interfaces; Exporting All Static Routes Except The Default Route To All Rip Interfaces; Example 2: Redistribution Into Ospf - Cabletron Systems IA1100 User's Reference Manual

Chapter 9: Routing Policy Configuration Guide

Exporting a Given Static Route to All RIP Interfaces

Router R1 has several static routes of which one is the default route. We would export this
default route over all RIP interfaces.
ip-router policy redistribute from-proto static to-proto rip network
default

Exporting All Static Routes to All RIP Interfaces

Router R1 has several static routes. We would export these routes over all RIP interfaces.
ip-router policy redistribute from-proto static to-proto rip network all

Exporting All Static Routes Except the Default Route to All RIP Interfaces

Router R1 has several static routes. We would export all these routes except the default
route to all RIP interfaces.
ip-router policy redistribute from-proto static to-proto rip network all
ip-router policy redistribute from-proto static to-proto rip network
default restrict

Example 2: Redistribution into OSPF

For all examples given in this section, refer to the configurations shown in
page 158.
The following configuration commands for router R1:
• Determine the IP address for each interface
• Specify the static routes configured on the router
146 Internet Appliance User Reference Manual
Figure 19 on