Chapter 17: RMON Configuration Guide
Configuring RMON Groups
As mentioned previously, control tables in many RMON groups specify the data that is to
be collected for the particular RMON group. If the information you want to collect is in
the default control tables, then you only need to turn on the default tables when you
specify the RMON groups (Lite, Standard, or Professional); you do not need to configure
entries in the default tables.
The following table shows the rmon command that you use to configure each RMON
group:
To configure the Address
Map group.
To configure the Application
Layer Matrix top n entries.
To configure the Alarm
group.
To configure the Packet
Capture group.
To configure the Filter group,
you must configure both the
Channel and Filter control
tables.
To configure the Etherstats
group.
254
rmon address-map index <index-number> port <port>
[owner <string>] [status enable|disable]
rmon al-matrix-top-n index <index-number> matrix-
index <number> ratebase terminal-packets|terminal-
octets|all-packets|all-octets duration <number> size
<number> [owner <string>] [status enable|disable]
rmon alarm index <index-number> variable <string>
[interval <seconds>] [falling-event-index <num>]
[falling-threshold <num>] [owner <string>] [rising-
event-index <num>] [rising-threshold <num>]
[startup rising|falling|both] [status enable|disable]
[type absolute-value|delta-value]
rmon capture index <index-number> channel-
index<number> [full-action lock|wrap] [slice-size
<number>] [download-slice-size <number>]
[download-offset <number>] [max-octets <number>]
[owner <string>] [status enable|disable]
rmon channel index <index-number> port <port>
[accept-type matched|failed] [data-control on|off]
[turn-on-event-index <number>] [turn-off-event-
index <number>] [event-index <number>] [channel-
status ready|always-ready][description <string>]
[owner <string>] [status enable|disable]
rmon filter index <index-number> channel-index
<number> [data-offset <number>] [data <string>]
[data-mask <string>] [data-not-mask <string>] [pkt-
status <number>] [status-mask <number>] [status-not-
mask <number>] [owner <string>] [status
enable|disable]
rmon etherstats index <index-number> port <port>
[owner <string>] [status enable|disable]
Internet Appliance User Reference Manual