Configuration Of Router R1; Configuration Of Router R2 - Cabletron Systems IA1100 User's Reference Manual

Configuration of Router R1

The following is the configuration file for Router R1 in
1: interface create ip test address-netmask 10.0.0.1/16 port et.1.1
!
2: ip-redundancy create vrrp 1 interface test
3: ip-redundancy create vrrp 2 interface test
!
4: ip-redundancy associate vrrp 1 interface test address 10.0.0.1/16
5: ip-redundancy associate vrrp 2 interface test address 10.0.0.2/16
!
6: ip-redundancy start vrrp 1 interface test
7: ip-redundancy start vrrp 2 interface test
Router R1 is the owner of IP address 10.0.0.1/16. Line 4 associates this IP address with
virtual router
On line 5, Router R1 associates IP address 10.0.0.2/16 with virtual router
However, since Router R1 does not own IP address 10.0.0.2/16, it is not the default Master
for virtual router

Configuration of Router R2

The following is the configuration file for Router R2 in
1: interface create ip test address-netmask 10.0.0.2/16 port et.1.1
!
2: ip-redundancy create vrrp 1 interface test
3: ip-redundancy create vrrp 2 interface test
!
4: ip-redundancy associate vrrp 1 interface test address 10.0.0.1/16
5: ip-redundancy associate vrrp 2 interface test address 10.0.0.2/16
!
6: ip-redundancy start vrrp 1 interface test
7: ip-redundancy start vrrp 2 interface test
On line 1, Router R2 is made owner of IP address 10.0.0.2/16. Line 5 associates this IP
address with virtual router
Line 4 associates IP address 10.0.0.1/16 with virtual router
Backup for virtual router
Internet Appliance User Reference Manual
, so Router R1 is the Master for virtual router
VRID=1
.
VRID=2
, so Router R2 is the Master for virtual router
VRID=2
.
VRID=1
Chapter 5: VRRP Configuration Guide
Figure 5:
VRID=1
Figure 5:
, making Router R2 the
VRID=1
.
.
VRID=2
.
VRID=2
67