Table of Contents
Advertisement
Monitoring RADIUS
You can monitor RADIUS configuration and statistics within the IA.
To monitor RADIUS, enter the following commands in Enable mode:
Show RADIUS server statistics.
Show all RADIUS parameters.
Configuring TACACS
In addition, Enable mode access to the IA can be made secure by enabling a Terminal
Access Controller Access Control System (TACACS) client. Without TACACS, TACACS
Plus, or RADIUS enabled, only local password authentication is performed on the IA. The
TACACS client provides user name and password authentication for Enable mode. A
TACACS server responds to the IA TACACS client to provide authentication.
You can configure up to five TACACS server targets on the IA. A timeout is set to tell the
IA how long to wait for a response from TACACS servers.
To configure TACACS security, enter the following commands in the Configure mode:
Specify a TACACS server.
Set the TACACS time to wait for a
TACACS server reply.
Determine IA action if no server
responds.
Enable TACACS.
Monitoring TACACS
You can monitor TACACS configuration and statistics within the IA.
To monitor TACACS, enter the following commands in Enable mode:
Show TACACS server statistics.
Show all TACACS parameters.
Internet Appliance User Reference Manual
Chapter 14: Security Configuration Guide
radius show stats
radius show all
tacacs set server <hostname or IP-addr>
tacacs set timeout
tacacs set last-resort password|succeed
tacacs enable
tacacs show stats
tacacs show all
<number>
229
Advertisement
Table of Contents
