Correcting Adjustments Based On Labeler Result; Correct Labeling; Error At Labeling - Weber Geset 100 Original User Manual

Chapter 10 Troubleshooting

Correcting Adjustments based on labeler result

Based on the labeler result you can draw conclusions from the necessary adjustments.

Correct labeling

If the labeling is performed correctly, the label is
free from creases,
¥
straight,
¥
always at the same position on the product.
¥
No correction is necessary

Error at labeling

The label has creases.
Correct the labeling result as follows:
Step
1
Version: 16.07.13
Procedure
The application speed of the label may be too fast. Examine and correct the
application speed.
Page 74 of 77
32708885 Geset 100
Fig. 10-1: Product with correct labeling result
Fig. 10-2: Product with creases in the label
GB