Table of Contents
Advertisement
Chapter 2 Safety regulations
Workplaces for the operating personnel
The labeling station is an automated system and does not require operation while label-
ing.
When the labeling system is operating without any malfunction, the operator may
only be in the safe area, that is, the area covered by the protective measures.
For servicing, repairing and troubleshooting (remove the label from the applicator), etc.,
the labeling system can be operated from all sides.
Only one person is permitted to replace the consumable material.
All interventions are only permitted when the labeling system has stopped operation.
After troubleshooting and/or restarting the labeling station, the operator must im-
mediately leave the hazardous area and has to stay in the area designated by the
safety measures.
Waste disposal
Version: 16.07.13
This label is in compliance with RoHS 2 EU Directive 2011/65/EU given
observance of the prohibitions on use are and avoidance of pollutants.
Page 23 of 77
32708885 Geset 100
GB
Advertisement
Table of Contents
