Weber Geset 100 Original User Manual page 30

Chapter 5 Transport
Instruction
Use the following procedure to transport the labeling system to its site of use.
Step
1
2
3
4
5
Version: 16.07.13
Procedure
Transport the labeling system to its site of use (within 3 m). The labeling
system is precisely positioned during installation by a Technician from the
Bluhm Weber Group.
The straps are secured tightly and can fly back when they are cut and cause
injury.
Open, if available, the transport box (applied notes have to be observed!).
Remove any film and straps (if available).
Remove, if available, all transport securing devices from the rubber feet.
Lift the labeling system with a suitable material handling equipment in shown
way from the pallet (applied notes have to be observed!).
Before startup, remove all transport securing devices (identified red
tie wrap).
Page 30 of 77
32708885 Geset 100
Fig. 5-2: Lift labeling system from pallet
GB