Table of Contents
Advertisement
Chapter 10 Troubleshooting
Correcting adjustments based on labeler result
Based on the labeler result you can draw conclusions from the necessary adjustments.
Correct labeling
If the labeling is performed correctly, the label is
free from creases,
straight,
always at the same position on the product.
No correction is necessary
Error at labeling
The label has creases.
Correct the labeling result as follows:
Step
1
Version: 15.01.14
Procedure
The application speed of the label may be too fast. Examine and correct the
application speed.
page 56 of 59
40002674 BTA Geset 117
Fig. 10-1: Product with correct labeling result
Fig. 10-2: Product with creases in the label
GB
Advertisement
Table of Contents
