Table of Contents
Advertisement
Chapter 2 Safety regulations
Version: 16.07.13
Hazard from actively controlled movements.
CRUSHING HAZARD!
The movements of the labeling station are motor-driven by an
automatic controller.
- Maintain a distance from moving parts.
Danger to health from the improper use of lubricants and
cleaners.
HEALTH HAZARD!
The instructions in the manufacturer's current safety data sheets
for the specific lubricants and cleaners that are used must be ob-
served along with the applicable safety and disposal regulations.
Tripping hazard from connecting lines.
RISK OF INJURY!
Connecting lines for power, compressed air and computer and
signal lines can pose a tripping hazard, causing serious injury.
̶ Release the tension of connecting lines to the system and run
them so that they do not pose a hazard
Danger of injury from corners and edges.
RISK OF INJURY!
Scrapes and cuts can result from sharp edges and pointed cor-
ners. Always keep the work area clean. The label web forms
sharp edges.
̶ Observe caution when working close to sharp edges and
pointed corners. Remove unnecessary objects.
̶ In case of doubt, wear protective gloves.
̶ Be careful when inserting and exchanging the label web.
*² Risk of injury due to light beam.
RISK OF INJURY!
*² Sensors or *²camera illumination may have a strong light inten-
sity.
̶ Do not look into the source of light.
Page 18 of 77
32708885 Geset 100
*² Only if system has the appropriate features.
GB
Advertisement
Table of Contents
