Table of Contents
Advertisement
Chapter 5 Transport
Requirements
The labeling system is packed when delivered (with possible exceptions), that is:
¥
It is standing on a pallet
•
It may be wrapped with stretch film or in a transport box
•
It may be secured with additional straps and the plate feet may be screwed to
•
the pallet
Access ways to the machine are sufficiently dimensioned and not blocked.
¥
Required equipment
Suitable means transport (double pallet trucks or forklifts with a minimum capaci-
¥
ty of 1000 kg). When using a forklift, drive slowly.
Use a steel strapping cutter to remove the straps
¥
A crescent wrench for the transport securing devices.
¥
No.
1
2
3
4
Version: 16.07.13
Remove the packaging material and the transport securing de-
vices only at the site of use, and transport the labeling system in
its original packaging to the labeling site. If the labeling system is
not secured, it can tip over easily when transported.
Description
TRANSPORT BOX
STRAP
TRANSPORT SECURING SCREW
RUBBER FEET
Page 29 of 77
32708885 Geset 100
Fig. 5-1: Examples of packaging
GB
Advertisement
Table of Contents
