Adjust Wrapping Unit Geset 121 - Weber Geset 100 Original User Manual

Chapter 7 Adjustment and initial operation
Step
5
6
7
8

Adjust wrapping unit Geset 121

The label with the preparatory part is applied onto the product and by means of the rotati-
on and the counter pressure of the pusher plate pushed onto the product. The counter
pressure of the pusher plate and the wrapping unit (the speed of the wrapping unit is twice
as fast as the speed of the base conveyor) put the product to rotation.
No.
1
2
3
4
5
6
7
8
9
10
Version: 16.07.13
Procedure
Adjust the top conveyor to the required criteria (s. section above).
Tighten again the interlock (clamping lever Pos. 3 Fig. 7-6).
Remove the product.
Arrange several sample labelings to check the adjustments.
Description
BRACKET AND POSITIONING DEVICE OF FOAM RUBBER PLATE
PUSHER PLATE (SPONGE RUBBER)
WRAPPING UNIT
BRACKET AND POSITIONING DEVICE OF SIDE GUIDANCE
SIDE GUIDANCE OUTSIDE
P
RODUCT TRANSPORT DIRECTION
BASE CONVEYOR
DISTANCE (PRODUCT WIDTH - APPR. 5 MM)
SIDE GUIDANCE INSIDE
CLAMPING LEVER FOR HEIGHT ADJUSTMENT
Page 44 of 77
32708885 Geset 100
Fig. 7-7: Wrapping unit
GB