Table of Contents
Advertisement
Chapter 1 General information
Term
PSI
Peeler plate
Pusher roller
Rewinder
Re- and Unwinder
RFID
RFID label
Outfeed
Service unit (FR group)
Start sensor
Stroke
Tamp
Tamp
pad
tion/blowing tamp)
Touchscreen
Trigger-signal
Unwinder
VAC
Vacuum
(Venturi)
Version: 16.07.13
Explanation
American
(1 PSI = 0.06895 bar).
Metal plate about which the label is peeled off.
Pushes the label onto the product strongly sticking.
Holder (generally for three-inch cardboard core) for winding
the label backing strip. The rewinder winds the backing pa-
per that is returned from the printing module. It is controlled
by the dancer arm (see dancer arm). Rewinders have a
motorized drive.
See rewinder and unwinder.
This abbreviation stands for radio frequency identification.
This technology is used to identify products so that they can
be tracked using smart labels (see RFID label .
The RFID label or also called Smart label is a particular
label that has a transponder onto which data can be written
or read via radio. The idetification of products labeled in this
way is possible contactless by an antenna.
The outfeed forwards the products to the customer's con-
veying system. Here the products are removed.
This unit consists of:
See also "Product sensor". The start sensor scans the lead-
ing edge of the product. As soon as a product is detected,
the labeling procedure starts. The label position on the
product is adjusted by the sensor position.
Way the tamp moves during extension in direction of prod-
uct.
Unit that grabs the label by means of a vacuum, conveys it
to the product and applies it.
Perforated plate of the tamp to which the peeled off label is
(suc-
transferred.
Touch-controlled screen or monitor
The signal from the sensor or PLC which is used to activate
application.
The unwinder receives the roll of labels (generally with a 3
inch cardboard core). The unwinder allows the label roll to
unwind smoothly without skipping, and a roll brake governs
the feed (see also the dancer arm). Unwinders can also
have a motor drive
Alternating voltage
An unit that uses compressed air to generate a vacuum.
generator
Page 11 of 77
unit
of
measure
A gauge for displaying the compression of
the compressed air (in bar)
Quick action stop valve
Water trap for manually draining any con-
densate
32708885 Geset 100
for
compressed
air.
GB
Advertisement
Table of Contents
