Weber Geset 100 Original User Manual page 39

Chapter 7 Adjustment and initial operation
Please put the labeling system Geset 121 into operation as follows
Step
1
2
3
4
5
6
7
8
9
Version: 16.07.13
Procedure
If there are already exist notes of the „adjustment values" (ref. page 37) for
the product to be labeled, the values should be available.
Adjust base conveyor (s. from page 40).
Adjust side guidance (s. from page 41).
Adjust wrapping unit (s. from page 44)
Insert label roll in labeler (s. from page 46)
Adjust product light barrier(s. from page 46)
Change peeler plateChange peeler plate (s. from page 47)
Positioning of peeler plate to product (s. from page 48)
Pitch peeler blade (Gimbal adjustment) (s. from page 50)
Page 39 of 77
32708885 Geset 100
GB