Table of Contents
Advertisement
Chapter 7 Adjustment and initial operation
Adjust top conveyor Geset 114
The top conveyor is used exclusively for side labeling and has to be placed other-
wise out of the range of production.
Products are moved with the base conveyor below the top conveyor and are there fixed
and the side labeling is applied. The top conveyor has a powered conveyor belt that is ba-
lanced with the speed of the base conveyor.
The top conveyor fixes products in aligned position so that they can be labeled laterally
without any movement. The top conveyor compensates product tolerances in height by
spring-mounted units.
The top conveyor is screwed at the top conveyor-mounting. It has a vertical positioning
device (ref. page 36) with which the top conveyor is adjusted to the different product
heights.
The top conveyor is used only for side labeling and has to be put up when not used so
that products can pass without any contact.
No.
1
2
3
4
5
6
7
Information on adjustment of top conveyor with spindle adjustment
The height of the top conveyor (Fig. 7-6: Pos. 4) is adjusted by the crank (Fig. 7-6, Pos.1).
The top conveyor provides at beginning and end a diagonal infeed or outfeed. In order to
adjust the top conveyor height to the product, please position the product in the center ar-
ea of the slopes (Fig. 7-6: Pos. 5). The right top conveyor height is achieved if the product
is positioned tightly between both conveyor belts (Fig. 7-6: Pos. 6) and it does not deform
in doing so.
Version: 16.07.13
Description
CRANK FOR HEIGHT ADJUSTMENT (OPTIONAL)
DIGITAL DISPLAY (OPTIONAL)
CLAMPING TO HEIGHT ADJUSTMENT (INTERLOCK)
TOP CONVEYOR
ALIGNMENT POINT FOR PRODUCT HEIGHT
BASE CONVEYOR
TRANSPORT DIRECTION OF PRODUCT
Page 42 of 77
32708885 Geset 100
Fig. 7-6: Adjust top conveyor
GB
Advertisement
Table of Contents
