Description Of The Labeling Station; Side Labeling Geset 114; Wrap-Around Labeling Geset 121 - Weber Geset 100 Original User Manual

Chapter 4 Description of the labeling station

4. Description of the labeling station

The labeling station Geset 114 is used to label square, cyclindrical, conical, oval as well
as half-rounded products automatically.
The labeling station Geset 121 is used to label round products automatically.
Depending on kind and dimension of the product, different label sizes are used.
Further function descriptions about machine components (e.g. top conveyor, wrap-
ping unit...) can be found in the chapter Adjustment and initial operation.

Side labeling Geset 114

For this labeling, up to 2 (each righthand and lefthand from base conveyor) laterally
installed label applicators (Alpha) are active.
The products are fed manually or separated by a conveying system provided by the
customer to the labeling system. Here an exact alignment of the products is essential.
The top conveyor stabilizes the product's position for the side labeling. Thus fixed, the
products are firstly transported to the labelers.
Depending on application, one or both outsides receive one label in so-called Wipe-On
procedure when the product passes by.
When the label is applied, the labels are often pushed on by a pusher (pusher brush, -
squeegee or -rolls).
The conveyor belt moves the completely labeled products to the outfeed area. Here the
products are removed manually or be the customer-specific conveying system.

Wrap-around labeling Geset 121

The wrap-around labeling is only possible with cylindrical products.
The products are fed manually or separated by a conveying system provided by the
customer to the labeling system.
The side guidances position the products in line with the outside edge of the base
conveyor.
The base conveyor feeds the products to the label applicator. There the label with the
preparatory part is applied onto the product and by means of the rotation and the counter
pressure of the pusher plate pushed onto the product.
The counter pressure of the pusher plate and the wrapping unit (the speed of the wrap-
ping unit is twice as fast as the speed of the base conveyor) put the product to rotation.
The conveyor belt moves the completely labeled products to the outfeed area. Here the
products are removed manually or be the customer-specific conveying system.
Version: 16.07.13 Page 25 of 77
32708885 Geset 100
GB