Change Peeler Plate - Weber Geset 100 Original User Manual

Chapter 7 Adjustment and initial operation

Change peeler plate

The peeler plate is part of a labeler (Fig. 7-9: Pos. 1). Its version depends on intended
use, product and label width and has to be changed according to requirements.
Information on changing the peeler plate
The peeler plate (Fig. 7-9: Pos. 1) is screwed with the bracket (Fig. 7-9: Pos. 2). The
complete peeler plate is fixed at the labeler's bracket (Fig. 7-9: Pos. 4). After each chan-
ge, an adaption of the peeler plate's position is necessary.
No.
1
2
3
4
5
Requirements
Labeling station is turned off.
¥
Required equipment
Philips screw driver
¥
Hexagon socket screw
¥
Version: 16.07.13
Description
PEELER PLATE
PEELER PLATE'S BRACKET
MOUNTING SCREWS
LABELER'S BRACKET
MOUNTING SCREWS PEELER PLATE
Page 47 of 77
32708885 Geset 100
Fig. 7-9: Change peeler plate
GB