Chapter 7 Adjustment and initial operation
Adjust peeler plate of top side labeling
The peeler plate of top side labeling has to be adjusted on distance and position to the
product. Use the adjusting device of the labeler.
Information on adjustment of peeler plate
The peeler plate has to be adjusted on a distance of approx. 1-3 mm to the product (no
product contact) via traverse adjustment of the labeler.
The required label position on the product is adjusted via lateral adjustment of the labeler.
No.
1
2
3
4
5
Requirements
¥
Side guidance is correctly adjusted (s. page 37).
¥
Labeler is switched on and ready.
¥
One or more sample products.
¥
No transportation of products.
Version: 15.01.14
Description
BASE CONVEYOR
PEELER PLATE
PRODUCT
CLAMPING FOR TRAVERSE ADJUSTMENT
CRANK FOR LATERAL ADJUSTMENT
page 39 of 59
40002674 BTA Geset 117
Fig. 7-4: Adjust top peeler plate
GB