Table of Contents
Advertisement
Chapter 7 Adjustment and initial operation
Adjust base conveyor
The base conveyor transports the product to be labeled from infeed passage to labeler
and from labeler to outfeed passage.
Information on adjustment of base conveyor's height
The height of the base conveyor has to be adapted to the customer-specific conveyor
system or to the ergonomic requirements of the operator personnel accordingly.
The base conveyor (Pos. 1, Fig. 7-1) is installed fix. The height of the base conveyor can
be adjusted by the threads at the rubber feet (Pos. 4, Fig. 7-1). Adjust the base conveyor
horizontal via air level.
No.
1
2
3
4
Requirements
¥
Power supply is turned off.
¥
No transportation of products.
Required equipment
¥
Screw wrench (for rubber feet adjustment)
¥
Air level
Instruction
Please adjust the height of the base conveyor as follows.
Step
1
Version: 15.01.14
Description
BASE CONVEYOR
FIXING BRACKET (BASE CONVEYOR)
DRIVE MOTOR
RUBBER FEET
Procedure
Loosen the counternuts of the rubber feet.
page 35 of 59
40002674 BTA Geset 117
Fig. 7-1: Base conveyor
GB
Advertisement
Table of Contents
