4
Front brakes (steel version) - RS 6
⇒ "4.1 Servicing front brakes (steel version) - RS 6", page 77
4.1
Servicing front brakes (steel version) -
RS 6
Note
Always install all parts supplied in repair kit.
♦
After renewing brake pads, depress brake pedal firmly several
♦
times with vehicle stationary so that the pads are properly
seated in their normal operating position.
To draw off brake fluid from brake fluid reservoir use a bleeder
♦
bottle which is used only for brake fluid. Brake fluid is poison‐
ous and must NOT be drawn off by sucking through a hose.
Check that the brake caliper moves freely by moving it from
♦
side to side.
1 - Bolt
❑ 196 Nm
2 - Brake caliper
Note
Brake caliper must not be disman‐
tled. Do not loosen any bolts on the
brake caliper.
❑ Detaching and attach‐
ing
⇒ page 78
❑ Renewing
⇒ page 79
3 - Retaining pin
4 - Brake disc
❑ Allocation and wear limit
⇒ page 1
❑ Detaching and attach‐
ing
⇒ page 85
❑ Renewing
⇒ page 86
5 - Bolt
❑ 10 Nm
6 - Brake pads
❑ With pad wear indicator
wire on inner brake pad
❑ Ensure correct installa‐
tion position
Note
The damper weights point towards
the brake disc.
❑ Allocation and wear limit
⇒ page 1
❑ Removing and installing
⇒ page 81
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
4. Front brakes (steel version) - RS 6
77