Audi A6 2005 Workshop Manual page 105

– Insert pad retaining spring -17- into brake caliper and hold in
position.
Ensure correct installation position
– Slide pad retaining pin -16- through brake caliper and brake
pads from inside to outside as far as stop. If necessary, use
punch to press pin as far as stop.
Note
Make sure that paint on brake caliper is not scratched or dam‐
aged.
Note
The hole for the securing clip is located on the inside of the brake
caliper.
– Slide pin -15- for pad retaining spring through brake caliper
from inside to outside as far as stop. If necessary, use punch
to press pin as far as stop.
Note
Make sure that paint on brake caliper is not scratched or dam‐
aged.
Note
The hole for the securing clip is located on the inside of the brake
caliper.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
99
5. Ceramic front brakes