Audi A6 2005 Workshop Manual page 90

Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
Note
The damper weights point towards the brake disc.
– Insert pad retaining spring -10-.
Note
Ensure that pad retaining spring is seated correctly.
– Push one pad retaining pin -8- through hole in brake caliper
from inside to outside. If necessary, use punch to press pad
retaining pin as far as stop.
Note
The pad retaining spring is located under the pad retaining pin.
♦
The spring at the end of the pad retaining pin holds the pad
retaining pin in place in the brake caliper.
Make sure that paint on brake caliper is not scratched or dam‐
♦
aged.
– Press second pad retaining pin -8- through hole in brake cal‐
iper from inside to outside. While doing so, press down pad
retaining spring. If necessary, use punch to press pad retain‐
ing pin as far as stop.
Note
The pad retaining spring is located under the pad retaining pin.
♦
The spring at the end of the pad retaining pin holds the pad
retaining pin in place in the brake caliper.
Make sure that paint on brake caliper is not scratched or dam‐
♦
aged.
84
Rep. gr.46 - Brakes - mechanism