Detaching And Attaching Front Brake Caliper (Ceramic Brakes) - Audi A6 2005 Workshop Manual

Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
14 - Securing clip
Note
Lock each retaining pin with a se‐
curing clip
15 - Pin for pad retaining spring
❑ Ensure correct installation position
❑ Press through as far as possible from inside to outside
Note
Lock each retaining pin with a se‐
curing clip
16 - Brake pad retaining pin
❑ Ensure correct installation position
❑ Press through as far as possible from inside to outside
Note
Lock each retaining pin with a se‐
curing clip
17 - Brake pad retaining spring
❑ Ensure correct installation position
New-generation brake pads
Make sure the brake pads are installed in the correct position. The
brake pad with wear indicator is located on the inside. The cham‐
fered side of the brake pad -arrow- faces downwards when in‐
stalled.
5.2 Detaching and attaching front brake cal‐
iper (ceramic brakes)
Always use new bolts ⇒ ETKA .
Detaching
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1332-
♦ Ratchet - V.A.G. 1332/1-
♦ Piston resetting appliance - T10145-
– Raise vehicle.
– Remove wheels.
90
Rep. gr.46 - Brakes - mechanism