– Screw in locating bolt -8- and tighten to 10 Nm.
– Attach brake caliper
– Install brake pads
⇒ page 95
New-generation brake pads
Make sure the brake pads are installed in the correct position. The
brake pad with wear indicator is located on the inside. The cham‐
fered side of the brake pad -arrow- faces downwards when in‐
stalled.
– Fit wheels.
Tightening torque for wheel bolts ⇒ Rep. gr. 44
Caution
Make sure that the brakes work properly before the vehicle is
driven on the road.
⇒ page 90
.
.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
103
5. Ceramic front brakes