Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
3
Front brakes (PR 1LJ/1LL)
⇒ "3.1 Servicing front brakes (PR 1LJ/1LL)", page 70
3.1
Servicing front brakes (PR 1LJ/1LL)
Note
Always install all parts supplied in repair kit.
♦
After renewing brake pads, depress brake pedal firmly several
♦
times with vehicle stationary so that the pads are properly
seated in their normal operating position.
To draw off brake fluid from brake fluid reservoir use a bleeder
♦
bottle which is used only for brake fluid. Brake fluid is poison‐
ous and must NOT be drawn off by sucking through a hose.
Check that the brake caliper moves freely by moving it from
♦
side to side.
1 - Brake pads
❑ Wear limit
⇒ page 1
Note
A wire for the wear indicator is fitted
to the inner pad (with spring).
❑ There is an adhesive foil
on the backplates of the
outer brake pads. Re‐
move the protective foil
before fitting pads.
❑ Before fitting pads,
clean guide surfaces
and apply a thin coating
of polycarbamide
grease ⇒ Parts cata‐
logue
❑ Different versions avail‐
able ⇒ Parts catalogue
❑ Always renew on both
sides of axle
❑ Removing and installing
⇒ page 72
❑ Checking pad thickness
⇒ Maintenance ; Book‐
let 4E
Note
Clean the brake calipers thoroughly
(grease-free) before inserting new
brake pads. When doing this, make
sure that all adhesive foil residue on
the contact surfaces for the outer
brake pad is removed.
70
Rep. gr.46 - Brakes - mechanism