Removing And Installing Brake Pads (1Lt) - Audi A6 2005 Workshop Manual

Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
13 - Brake disc
❑ Wear limit ⇒ page 1
❑ Detach brake caliper prior to removing
❑ Thickness ⇒ page 1
❑ Allocation ⇒ page 1
WARNING
If one brake disc is dam‐
aged or worn, the other
discs must also
checked for damage and
wear.
14 - Bolt
❑ Tightening torque: 5 Nm
15 - Wheel bolt
16 - Brake caliper housing
❑ Unscrew from brake carrier to renew brake pads
❑ Servicing brake caliper
17 - Guide pin
❑ 30 Nm
18 - Trim cap
Note
Detach protective cap before un‐
screwing guide pin. Fit protective
cap after screwing in guide pin.
1.2 Removing and installing brake pads
(1LT)
When renewing the brake pads, also check the brake disc for
wear. Refer to wear limit for brake disc
⇒ "1.2 Brakes, technical data", page 1
58
Rep. gr.46 - Brakes - mechanism
be
⇒ page 130
.