Audi A6 2005 Workshop Manual page 157

♦ Carefully lever protective cap -1- and seal out of brake caliper
with gentle movements using removal tool - T 40338- -2-; take
care not to damage groove for protective cap in brake caliper.
♦ Piston resetting appliance - T10145-
♦ Removal tool - T 40338-
♦ Vehicle diagnostic, testing and information system - VAS
5051B- or -VAS 5052-
Removing
– Screw piston out of brake caliper as far as possible.
– Force piston out of brake caliper housing using compressed
air.
Note
When removing ensure that the bore of the cylinder is not
♦
damaged.
Place a piece of wood in the recess to prevent damaging the
♦
piston.
Removal tool - T 40338-
– Carefully lever protective cap -1- and seal out of brake caliper
with gentle movements using removal tool - T 40338- -2-; take
care not to damage groove for protective cap in brake caliper.
Installing
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
7. Rear brake calipers for electronic parking brake and handbrake (EPB)
Brake system - Edition 04.2019
151