6.2
Removing and installing brake pads
Steel version brakes:
When renewing the brake pads, also check the brake disc for
wear. Refer to wear limit for brake disc
⇒ "1.2 Brakes, technical data", page 1
Ceramic brakes:
The ceramic brake discs must always be checked for damage and
wear when renewing the brake pads.
♦
⇒ "2 Assessment of ceramic brake discs", page 6
♦
⇒ "3 Assessing degree of wear on ceramic brake discs", page
10
Special tools and workshop
equipment required
♦ Torque wrench - V.A.G 1331-
♦ Torque wrench - V.A.G 1332-
♦ Vehicle diagnostic, testing and information system - VAS
5051B- or -VAS 5052-
♦ Tool insert - T40065-
♦ Tool insert - T40066-
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
.
6. Rear brakes, electronic parking brake and handbrake (EPB)
Brake system - Edition 04.2019
107