Audi A6 2005 Workshop Manual page 133

– Remove wheels.
Note
Ignition must be switched off at least 30 sec. before unplugging
♦
connector.
Clean whole area around connector and actuator motor/brake
♦
caliper.
Unplug connector -1- of actuator motor.
♦
– Unscrew both securing bolts -1- on actuator motor.
– Detach actuator motor in direction of arrow
– Remove seal with suitable tool.
Make sure you do not damage annular groove for seal and con‐
tact surface on actuator motor.
Note
Do not use tools with sharp edges.
– If necessary clean annular groove and contact surfaces. Only
use brake cleaner.
Installing
– Fit new seal.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
11. Overview of components - electronic parking brake and handbrake (EPB)
Brake system - Edition 04.2019
127