Use The Storage Tab To - Adaptec Snap Server 110 User Manual

Use the Storage Tab to...

• Create RAID Sets, Volumes, and Shares — The Storage Guides link opens the
RAID wizard, which takes you through the steps to create or modify a RAID,
volumes, and shares.
You can also create or modify your RAID by clicking the RAID Sets link. And
you can create or modify volumes using the Volumes link.
See page 34 for more information about modifying your disk configuration.
• View your disk drive information — The Disks/Units link opens a page that
displays a graphic representation of disk status and the RAID configuration on
your server.
• Assign Quotas — The Quotas link opens a page where you can set limits to the
amount of space different users have available on the volume. For more
information about assigning quotas, see page 40.
• Schedule a Snapshot — The Snapshots link opens a page where you can
schedule a snapshot of your volume to be used for backup or recovery
purposes. For more information about Snapshots, see page 34.
Snapshots require a separate license (available through the
Note
SnapExtensions page), and space allotted on the volume (see page 34 for more
information).
• Create or modify an iSCSI disk — Use the
iSCSI disk. For more information about iSCSI, see the iSCSI topic in the online
help.
iSCSI requires a separate license (available through SnapExtensions).
Note
Using the Administration Tool
link to create or modify an
iSCSI
Chapter 2 Using Your Snap Server 27