Table of Contents
Advertisement
Installing Third-Party Agent Software
Installing Third-Party Agent Software
For purposes of illustration, the procedures in this section assume that (1) you are
using the default Snap Server configuration; and (2) you have created a directory
called agent (to which to copy your agent/client files) on the default share
(SHARE1), such that the path to the directory is /shares/SHARE1/agent.
• Installing a CA BrightStor ARCserve or CA Enterprise Agent
• Installing a VERITAS Backup Exec Agent
• Installing a VERITAS NetBackup 3.4.1 Client
• Installing the VERITAS NetBackup 4.5 FP6 Client
• Installing a Legato NetWorker Client
Installing a CA BrightStor ARCserve or CA Enterprise Agent
This section explains how to install the CA BrightStor ARCServe 2000 v7, CA
BrightStor ARCServe Backup v9, and CA BrightStor Enterprise Backup v10.
Installing the BrightStor ARCserve backup agent on a Snap Server requires
Tip
three agent (*.rpm) files. These agent files are available from your BrightStor
ARCserve CD, but some ARCserve CDs may not contain all the required files. To
obtain the files you need, contact Computer Associates.
Connect to the Snap Server via SSH.
1
At the prompt, login as admin
2
during the initial setup of the server.
To change to superuser, enter the following command and press
3
su -
At the prompt, enter the admin user password, and press
4
To change to the agent directory, type the following command and press
5
cd /shares/SHARE1/agent
To unpack the agent files for CA BrightStor ARCServe 2000 v7.0, enter the
6
following commands at the prompt, and press
When you unpack the agent files, ignore the errors regarding the bin group
Tip
and bin user. These errors will not affect installation or use of the agent.
rpm -Uvh --nodeps calicens.rpm
rpm -Uvh --nodeps uagent.rpm
rpm -Uvh --nodeps asagent.rpm
106
Snap Server Administrator Guide
using the password you created for this account
,
Enter
:
Enter
:
Enter
after each one.
:
Enter
Advertisement
Table of Contents
