Table of Contents
Advertisement
Programming
In addition, the aux power output can be programmed as resettable or non-resettable power. Non-resettable power is suitable for powering
annunciators while resettable power is suitable for powering smoke detectors. Each press of the 1 key will cause the display to toggle
between Resettable Yes and Resettable No.
Trouble Reminder
SYSTEM SETUP
1=AUX POWER
2=TROUBLE REM
3=LANGUAGE
ENGLISH
System Setup Screen #4
Language
SYSTEM SETUP
1=AUX POWER
2=TROUBLE REM
3=LANGUAGE
ENGLISH
System Setup Screen #4
Charger Enable
SYSTEM SETUP
1=CHARGER ENAB
2=4XTM SPV ENAB
3=REM SYNC ENAB
System Setup Screen #5
4XTMF Supervision
SYSTEM SETUP
1=CHARGER ENAB
2=4XTM SPV ENAB
3=REM SYNC ENAB
System Setup Screen #5
Remote Sync Enable
SYSTEM SETUP
1=CHARGER ENAB
2=4XTM SUPV ENAB NO
3=REM SYNC ENAB
System Setup Screen #5
3.5.6 History
PROGRAMMING
1=HISTORY
2=COMMUNICATOR
3=ANNUNCIATORS
Programming Screen #3
View Events
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
While displaying the View Events screen, press 1 to view all events, 2 to view only alarms or 3 to view other events. Use the up and down
arrow keys to scroll through all of the displayed events.
78
The Trouble Reminder features causes the control panel piezo to sound a reminder 'beep' for alarms and trou-
bles, after the panel has been silenced. Refer to "Trouble Reminder" on page 68, for a detailed description of
24HR
this feature. Pressing 2 while viewing System Setup Screen #4 will cause the display to toggle to Trouble Rem
4 or Trouble Rem 24, which enables this feature for resound at either 4 or 24 hours, respectively. Each press of
the 2 key will cause the display to toggle between Trouble Rem 4 or Trouble Rem 24. Refer to the table on
page 47 for permissible settings.
The language option is used to change the text on the panel display to either English or French. Pressing the 3
key will cause the display to offer a choice of 1=English and 2=French.
24HR
If using an external battery charger, the FACP battery charger must first be disabled. Pressing 1 while viewing
YES
System Setup Screen #5 will cause the display to toggle to Charger Enab No, which will allow the use of an
NO
external battery charger. Each press of the 1 key will cause the display to toggle between Charger Enab. No and
YES
Charger Enab. Yes.
If a 4XTMF Transmitter Module is installed in the system, supervision must enabled in user programming.
YES
Pressing 2 while viewing System Setup Screen #5 will cause the display to toggle to 4XTM Supv Enab. Yes,
NO
which means there is a 4XTMF installed. Each press of the 2 key will cause the display to toggle between
YES
4XTM Supv Enab. No and 4XTM Supv Enab. Yes. Refer to the table on page 47 for permissible settings.
Synchronization is a feature that controls the activation of notification appliances in such a way that all devices
YES
will turn on and off at exactly the same time. Refer to Section 2.5, "Remote Synchronization Output", on page
27 for more information. To enable remote synchronization, press the 3 key while viewing System Setup
YES
Screen #5. Each press of the key will toggle the screen between Rem Sync Enab Yes and Rem Sync Enab No.
The History option allows an authorized user to view or erase events which have occurred in the control panel.
Pressing 1 while viewing Programming Screen #3 will display the History options as shown in the following
display:
Pressing 1 while viewing the History Screen will allow the user to select the events to be viewed as illustrated in
the following:
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
View Events Screen
ES-50X Series Manual — P/N LS10129-000FL-E:D 4/26/2021
Master Programming Level
Advertisement
Table of Contents
