Slide-In Labels - Honeywell Fire-Lite Alarms ES-50X Manual

Carefully cut along the outside of each label. Identify Function (F1-F4) keys as desired and slide the labels into the keypad. Starting at
the center of the keypad next to the Function Keys, slide each label into the groove towards the outer edge. Function Keys F1 and F3 are
not programmable in Canadian applications. Those keys must use the pre-printed labels below.
ES-50X Series Manual — P/N LS10129-000FL-E:D 4/26/2021

Slide-in Labels

Slide-in Labels
ALARM SIGNAL ON
TWO-STAGE
ALARM SIGNAL ON
ACTIVATION DU
SIGNAL D'ALARME
Slide-in Labels for Canadian Applications
AUTOMATIC ALARM
SIGNAL CANCEL
157