Table of Contents
Advertisement
Master Programming Level
Erase History
The Erase History option allows a user to erase all events from the history file. This will provide a clean slate in order to use the history file
to track future events. Pressing 2 while viewing the History Screen will display the following screen:
Pressing 1 while viewing the Erase History Screen will erase all events from the History file. During this process, the display will read as fol-
lows:
After the History file has been erased, the display will return to the History Screen.
3.5.7 Communicator
PROGRAMMING
1=HISTORY
2=COMMUNICATOR
3=ANNUNCIATORS
Programming Screen #3
Communicator Installed
The pre-installed communicator provides communication to a central station. Use of the communicator requires it be enabled in user pro-
gramming. Pressing 1 while viewing the Communicator Screen #1 will change the display to Installed No. Each press of the 1 key will cause
the display to toggle between Installed Yes and Installed No.
POTS Settings
COMMUNICATOR
1=INSTALLED
2=POTS SETTINGS
3=IP SETTINGS
Communicator Screen #1
POTS Line (X)
If telephone lines are connected to the IPOTS-COM board at J4 (Line 1) and J5 (Line 2), their settings can be configured by pressing 1 or 2,
respectively. Pressing 1 or 2 will display the following screen. The programming options for Line 1 and Line 2 are identical.
Phone Line (X) Enable
To enable the phone line, press 1 while viewing the POTS Line (X) Screen #1 to change the display to Enabled Yes. Each press of the 1 key
will cause the display to toggle between Enabled Yes and Enabled No.
Type
POTS LINE X
1=ENABLED
2=TYPE
3=SUPERVISED
POTS Line X Screen
ES-50X Series Manual — P/N LS10129-000FL-E:D 4/26/2021
The communicator settings allow the user to configure the settings for the pre-installed IPOTS-COM and
CELL-MOD/CELL-CAB-FL if installed in the system. Pressing 2 while viewing the Programming Screen #3
will cause the following Communicator options to be displayed:
COMMUNICATOR
1=INSTALLED
2=POTS SETTINGS
3=IP SETTINGS
Communicator Screen #1
The POTS settings configure the system when telephone lines are used to contact central station. Pressing 2
while viewing the Communicator Screen #1 will display the following.
NO
To select the type, press 2 while viewing the POTS Line (X) Screen #1. The following screen will be displayed:
YES
YES
ERASE HISTORY
PROCEED ?
1=YES
2=NO
Erase History Screen
ERASING HISTORY
PLEASE WAIT
Erase History Wait Screen
COMMUNICATOR
YES
1=PRI COMM PATH
2=SEC COMM PATH
3=TBL REPRT LIMIT 0
Communicator Screen #2
POTS SETTINGS
1=LINE 1
2=LINE 2
3=GAINS
POTS Settings Screen
POTS LINE X
1=ENABLED
YES
2=TYPE
TOUCHTONE
3=SUPERVISED
YES
POTS Line X Screen
TYPE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 60/40
Type Settings Screen
Programming
COMMUNICATOR
1=REPORT STYLE POINT
2=EVENT CODES
Communicator Screen #3
79
Advertisement
Table of Contents
